DESCRIPTION
This also applies to the GST-9 MOD1 Build Kit and MOD1 Jig. With the already incredibly sturdy jig for the original GST-9, we’ve further enhanced the finishing procedure. By providing extra support for the drill bits and enabling more exact completion, extended drill guides assist prevent the most frequent error when making 80% pistols: drilling irregular or off-center holes.
You will require its primary counterpart, the GST-9 V1 Polymer Jig, in order to finish your GST-9 V1 frame. The GST-9 Tool Kit and Slide Rails, which was first introduced in November 2019, offers the most durable and premium pistol jig platform since it is made of glass-filled polymer that is sourced from the United States.
Additionally, we’ve added a second bolt point to the jig’s clamping mechanism to ensure that it is completely covered. By doing this, you may be certain that every cut you make will be accurate. The US glass-filled reinforced polymer is also used to create the MOD1 Jig.
GST-9 Tool Kit and Slide Rails – Features:
- Glass-Filled Polymer Construction
- Five Steel Fastener Enclosure
- Precision Drill Guides
- Nickel Boron Slide Rails
We are unable to legally provide the jig or frame rails with the GST-9 frame due to recently modified ATF requirements. The jig and GST-9 frame must be ordered separately from one another from our website. There is one set of GST-9 frame rails per jig. For every 80% lower you want to make, you will need one jig. Only the jig comes with frame rails; the 80% lower is not included.
George –
Everything lined up perfect with this jig
Teddy –
This jig is self explanatory. It is so easy to use and the holes are marked for you. The only way you could mess up your lower is if you over grind the cutoff tabs
Chris –
overall a well designed/engineered product.
Shylock –
Both sides of the jig were warped leading to improper drill hole alignment and fitment. Lower was also warped, either the stock was stored improperly or the products are defective.
Herman –
Identical replacement part
Monte J –
Jig warped, had to hand drill outside of jig
George V –
very easy to use , drills a nice straight hole
Robert –
Great products and fast service.
Van Da Waal –
I’ve made about a dozen of these from various manufactures. This one however went together like it should. The additional parts tools bits and fasteners made this into a kit that any guy would enjoy using and end up with a functional piece.
Zachary N –
The frame is a Huge improvement over P80.
The kit is also superior.
Pamela M –
Hands down easiest jig to use !! Great quality!
Usman R –
I ordered the ar 15 conversion kit for my.308 jig. Well made and fits my .308 jig perfectly. What would I expect from 5D tactical. They make the best jigs you can buy.
Johnny –
Pretty straight forward, 80% G-19 kit.
Boris –
It is well built and sturdy
Josh –
easy to build frame and nice jig, should order steel pins due to the frame coming with plastic
lopez –
This jig is great, it’s super secure for all your needs in finishing your 80% lower. The bits included were great at speeding up the finished product.
Anthony –
I would have given 5 stars but the language that was used was not clear they referenced gst 9 and Gst mod one , I needed the mod 1 and of course got the original. The parts im speaking of are the rear slide raiIs going to cut them and sand them to fit.
Kay Taylor –
wish I would have known about the pro jig. would have bought it. but great jig.
Victor –
Great product and a great price
Pamela M –
The jig worked as advertised. It worked so well, that I ordered another frame to complete.
Robert –
very easy to use , drills a nice straight hole
Jack Shawn –
wish I would have known about the pro jig. would have bought it. but great jig.
Nathaniel B –
Required after I rimmed a hole in the original plate. Replacement matched perfectly and was able to complete work with no problems.
Adam C –
A joy to use.
will buy again
Jack Shawn –
There was a issue with one that was quickly resolved and now all functions flawlessly great work still waiting on the flared mag well attachment
Simon –
simple jig to use
Sam A –
Works great.
Ahmed –
Second time I’ve ordered, always fast shipping in my case
Matt Damon –
Don’t buy a frame without it
Zanny –
These are all you need to complete your frame build. I only wish you could buy the rails without buying the jig every time.
Skyler Williams –
Well thought out. Necessary to complete. Easy to use.
Anthony –
Another perfect jig from 5d
Edward –
Excellent Product
EDDIE –
Easy as all the rest
I like the feel of the grip texturing of these
Sir Benedict –
Always perfect. Every one. Stick with GST-9 over the other options.
Bernard F –
Was pretty impressed how easy my first glock lower was. Can’t wait to find a nice upper to finish the build
Christopher Mayer –
Very nice frame and jig kit is well conceived and easy to use. So easy a novice can dit it!
Rey Quan –
works well but needs some way to hook up a vac while milling
Denis –
Wish there was a warning the jig’s changed because I had to order new slide rails
Litty A –
Best 80% I have built yet
Kay Taylor –
I ordered the ar 15 conversion kit for my.308 jig. Well made and fits my .308 jig perfectly. What would I expect from 5D tactical. They make the best jigs you can buy.
Franklin Lyn –
Easy to use, fast and simple
Monte J –
Quick service build somewhat complicated due to rails needed a little bit of work will buy again
Freddie –
I’ve made about a dozen of these from various manufactures. This one however went together like it should. The additional parts tools bits and fasteners made this into a kit that any guy would enjoy using and end up with a functional piece.
David –
Worked as intended on GST9 frame with a normal hand drill
Bernard F –
Hands down easiest jig to use !! Great quality!
Thomas R –
The screw holes for the drill guide Block don’t line up. Well 2 out of the 4 do.